{"id":1800,"date":"2020-07-02T13:36:34","date_gmt":"2020-07-02T13:36:34","guid":{"rendered":"http:\/\/localhost:10003\/lexicon-terms\/seven-wastes\/"},"modified":"2022-05-26T17:08:42","modified_gmt":"2022-05-26T21:08:42","slug":"seven-wastes","status":"publish","type":"glossary","link":"https:\/\/www.lean.org\/lexicon-terms\/seven-wastes\/","title":{"rendered":"7 Wastes"},"content":{"rendered":"

The 7 wastes are Taiichi Ohno\u2019s categorization of the seven major wastes typically found in mass production:<\/p>\n

    \n
  1. Overproduction:<\/strong> Producing ahead of what\u2019s actually needed by the next process or customer. The worst form of waste because it contributes to the other six.<\/li>\n
  2. Waiting:<\/strong> Operators standing idle as machines cycle, equipment fails, needed parts fail to arrive, etc.<\/li>\n
  3. Conveyance:<\/strong> Moving parts and products unnecessarily, such as from a processing step to a warehouse to a subsequent processing step when the second step instead could be located immediately adjacent to the first step.<\/li>\n
  4. Processing:<\/strong> Performing unnecessary or incorrect processing, typically from poor tool or product design.<\/li>\n
  5. Inventory:<\/strong> Having more than the minimum stocks necessary for a precisely controlled pull system.<\/li>\n
  6. Motion:<\/strong> Operators making movements that are straining or unnecessary, such as looking for parts, tools, documents, etc.<\/li>\n
  7. Correction:<\/strong> Inspection, rework, and scrap.<\/li>\n<\/ol>\n\n\n
    <\/div>\n\n\n\n
    \"A<\/figure><\/div>\n\n\n\n

    In order to see waste, it’s important to first understand how to see work. There are two categories of work: <\/p>\n\n\n\n

    • Value-Creating Work<\/strong> \u2014 movements directly necessary for making products, such as welding, drilling, and painting.<\/li>
    • Incidental Work<\/strong> \u2014 motions that operators must perform to make products but that do not create value from the standpoint of the customer, such as reaching for a tool or clamping a fixture.<\/li>
    • Waste<\/strong> \u2014 motions that create no value and can be eliminated, such as walking to get parts or tools that could be positioned within reach.<\/li><\/ul>\n\n\n\n

      While observing work waste manifests in an operator’s mind and body. For instance, if an operator must search for parts or recall instruction, then there is waste in the flow of information to the operator. Similarly, if an operator must bend, reach, or walk to complete a job, there is waste that should be targeted for elimination. This not only improves productivity but makes the job safer and easier for the operator.<\/p>\n\n\n\n

      <\/div>\n\n\n\n

      7 Wastes Video Series<\/h2>\n\n\n\n
      <\/div>\n\n\n\n

      Overproduction<\/h3>\n\n\n\n
      \n